DC 12V 24V Smart 6CH 6 CH 10A Wireless Remote Control Light Motor Switch Relay Output Radio RF Transmitter Receiver

DC 12V 24V Smart 6CH 6 CH 10A Wireless Remote Control Light Motor Switch Relay Output Radio RF Transmitter Receiver
  • Продавецwww.ogloszeniabochnia.info
  • Список ценUS $25.88piece
  • Продажная ценаUS $25.88piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,7 (592)

Oписание продукта

Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
 
1.Transmitter
 
Channel: 6 CH
Remote Control Distance:0-200 M  ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.) 
Encode: PT2262
Frequency:315 or 433 MHz
Size: 125mm x 49mm x 20mm
Power Supply: 1 X 12V/23A Battery (NOT included)
 
2.Receiver
 
1)Toggle/Self-Lock: (Press Button 1 to learn) Press->On; Press again->Off
Press one button for one time is working/ON , press the same button again is stop/OFF .
 
2)Latched/Inter-Lock: (Press Button 2 to learn) Press->On; Press other button->Off
 
3)Momentary/Jog: (Press Button 4 to learn) Press and hold->On; Release->Off
Keep pressing one button is working /ON. Loosen your finger is stop/OFF.
 
4)Momentary & Toggle: (Press Button 3 to learn)  3 Buttons are Momentary and 3 Buttons are Toggle.
 
5)Toggle & Momentary: (Press Button 5 to learn)  Channel 1 is Toggle , other 5 Channels are Momentary.
 
(Original Setting is  Momentary , change it by yourself.)
 
Decode: Fixed code, soldering code
Power Supply (Operating Voltage): DC 12V / 24V
Current: 6 mA
Sensitivity:-105 dBm
Operating Temperature:-40‘C - 80’C
 
3.Package Included
 
1 x Receiver (with case)
2 x Transmitter (no batteries inside)
 
4.Learn code and Remove Code
 
Learning code:Press the learning button about 2 seconds until the indicator turns on.then press the key (choose 1 2 3 4 5) to learn,the receiver indicator flashes about 4 times,it means learning is finished.
 
Clear code:Press the learning button about 8 seonds until the indicator flashes 2 times to urn off. it means clear is finished.
BCD7-17-223